Ricoh Aficio 2035e Service Manual
Ricoh Aficio 2035e Service Manual 4,7/5 3165reviews
Internet Fax for Aficio 2035e/2045e Service Manual; Printer/Scanner Unit Type 1045 Parts List, Service Manual. Aficio 2035E: Ricoh Aficio 2035. Ricoh Aficio 2035E.
By interacting with the Adobe PostScript 3 controller in the device, this driver is able to produce an accurate representation of the screen image. We would like to show you a description here but the site won’t allow us.
Actually the code is for fuser. To get in the service mode is reset 107 hold clear button. To clear out the code go into service mode turn off and on machince. If that does not work.
The solution is below. Hope this helps. Fusing temperature warm-up error The fusing temperature does not reach the fusing standby temperature of 45oC (113oF) within 9 seconds for the B135 (35 cpm) 14 seconds for the B138 (45 cpm) after switching on the main power or closing the front cover, or 40 seconds after reaching 50oC the fusing roller does not reach warm-up temperature. Solutions • Fusing lamp defective • Poor fusing unit connector • Thermistor warped or broken • Thermostat has tripped • BICU defective • Power supply board defective Posted on Apr 29, 2008. Because in some moment the fusing temperature was more high than the optimal. Maybe it is just because of precaution issued the SC542.
Or maybe is problem. You need to reset the SC542 by entering the service mode. For this if you call service they will charge you big money. So if it is just issued just as precaution by doing the following procedure the machine will work fine again.
But if the code do not clear do not repeat the procedure more than ones that you can make bigger damage that it has have before the code. So follow the next procedure: first enter service menu by pressing the following keys in order. Press the yellow clear key the pres 107 and then press the red clear/stop key until on he screen write service menu or something other than the usual screen.
After that appear. Turn the machine of by the left side switch and wait 5 seconds, than turn it in again. Mitsubishi Lancer 99 Manual on this page. If starts to work everything is okey. If the SC542 appear again do not repeat the procedure.
Call a serice techician Oct 18, 2016 .